You have no items in your shopping cart.
Enjoy the features of Paragon’s Sentry 12-key digital controller on your manual-fire kiln. Works with kilns of any brand or age.
The wall-hanging TouchnFire 2, or TnF 2, plugs into the wall receptacle that your manual-fire kiln is now using. The kiln, in turn, plugs into a receptacle on the TnF 2. To install the thermocouple, which reads temperature, drill a 1/8” hole through the kiln’s firebrick wall. After mounting the thermocouple to the kiln, you are ready to fire. You could also mount the thermocouple through a drilled peephole plug (furnished with the TnF 2; the plug is tapered, however, which does not fit all brands of kilns). If you have a Kiln Sitter, you can continue to use it as an additional safety backup.
The TnF 2 comes with a drilled peephole plug, thermocouple and instructions. Warranty: two years for all components except the Sentry controller, which carries a 2 ½ year warranty.
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.
The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.