Yasui Large Base Mold Clamp For Digital ACC Models


SKU
74-266-C3

The new Yasui mold clamp system uses RFID Technology (Radio Frequency Identification)to program small micro chips that are embedded into the rubber molds. Because the operator no longer has to manually program the clamping system, the automatic reader system increases wax model productivity. It's as easy as just waving the rubber mold over the reader. This new technology allows the operator to program the correct parameters for each specific mold; including mold clamping and forward pressure, hold and vacuum time, and primary and secondary injection time.
 $2,101.00


Order Summary
Quantity (Each)1
Total Price$2,101.00
Yasui Large Base Mold Clamp For Digital ACC Models
Yasui Large Base Mold Clamp For Digital ACC Models

Improved Productivity Through RFID Technology...

The new Yasui mold clamp system uses RFID Technology (Radio Frequency Identification)to program small micro chips that are embedded into the rubber molds. Because the operator no longer has to manually program the clamping system, the automatic reader system increases wax model productivity. It's as easy as just waving the rubber mold over the reader. This new technology allows the operator to program the correct parameters for each specific mold; including mold clamping and forward pressure, hold and vacuum time, and primary and secondary injection time.

Features...

  • The new ICIS auto clamp system can be connected to digital and analog Yasui vacuum wax injectors
  • Previous model settings were in increments of 1 through 10, the ICIS allows finer adjustable increments of 1 through 100 for more precise control
  • The RFID tags allow the operator to simply place the rubber mold onto the mold reader, which then sets the best parameters automatically, thus eliminating operator input error and increasing productivity
  • Reprogrammable memory chips can be used over and over

Specifications...

  • Clamp Unit Max Rubber Mold Size: 125mm x 150mm x 50mm
  • Clamp Unit Dimensions: 196mm x 223mm
  • Clamp Unit Weight: Approx 8Kg
  • Controller Box Dimensions: N/A
  • Controller Box Weight: N/A
  • Power Supply: AC100 - 240V 50/60Hz, single phase
  • Press 1 (Primary Pressurization): 10 - 220 kPa
  • Press 2 (Secondary Pressurization): 10 - 220 kPa
  • TIME of starting press 2: 0 - 99.9 sec
  • Mold CLAMP: 30 - 235 kPa
  • Mold FORWARD: 65 - 235 kPa
  • Mold HOLD time: 0 - 300 sec
  • Range of Control, DVWI Setting: 0 - 99 sec, VAC time & injection time
  • Memory Number: 0 to 9
  • Clamp Count: 9999 Counts
To Top