Romanoff Fast Cast 3-kg 3D Resin & Wax Casting Investment Kit


SKU
Z14-305-FC

  • Investment Powder: 3-kgs (6.6-lbs) Fast Cast Powder
  • Binder Solution: 750ml Working Ready To Use Binder Solution
  • Application: Same day Casting of 3D Printed Resins and Wax in Gold and Platinum
  • Burnout Cycles: 3.5 hours & 6 hours
  • Country of Origin: United States
 $49.95

Quantityprice
1 to 2 $49.95
3 to 4 $48.45
5 and above $47.00
Priced Per 6.6 lb Kit

Total Price
$49.95
Romanoff Fast Cast 3-kg 3D Resin & Wax Casting Investment Kit
Romanoff Fast Cast 3-kg 3D Resin & Wax Casting Investment Kit

Description

FastCast was designed and formulated with simplicity and cost in mind. With only a 3.5 or 6-hour burn-out cycle, Fast Cast allows same-day casting of high and low temperature metals such as platinum, stainless steel (1600-1650F) or Gold and Silver (1300-1350F). Fast Cast has excellent expansion resistance strength, which will allow you to burn-out RP materials that are normally not casting friendly.

Features

 

  1. 750 mL Pre-mixed working solution (645 ml binder & 105ml distilled water)

  2. 3-kgs (6.6-lbs) Fast Cast Powder 

  3. 5ea 2-1/2” x 10” Inner-flask inserts (76-0855)

  4. Sticky flask base sealing wax (74-0603-KB)

  5. 5ea Wax sprue bases included (74-000-WC)

  6. 5ea Square Non-Asbestos tree-bases (76-0881-SQ)


Specifications
Size (Powder)
6.6 lbs. (3 kg)
   Size (Working Solution)       750 mL   
Output    Five 3"x3" Flasks   



Please Note: This product contains a blend of crystalline silica. Prolonged inhalation of this product may be harmful. IARC reports that there is sufficient evidence in humans for the carcinogenicity of inhaled crystalline silica in the forms of quartz or cristobalite from occupational sources. Symptoms may not appear until permanent lung damage has occurred. Persons who use this product should have periodic physical examinations for silica exposure. Work areas should be periodically tested to determine the amount of airborne crystalline silica compared to OSHA and MSHA accepted standards. ALWAYS wear NIOSH-approved breathing protection for crystalline silica dust when working with the product or when possible exposure to product dust exists. Users must comply with all applicable health and safety regulations relating to the safe handling of crystalline silica. See MSDS for information. California Prop 65 Warning: This product contains crystalline silica, a chemical known to the State of California to cause cancer.

Product Manual

Binder / Liquid

Product SDS

Investment / Powder

Product SDS

To Top