Castaldo LiquaFast Ice


SKU
73-0525 / 73-0526


Transparent RTV Silicone Jewelry Molding Rubber

New LiquaFast™ ICE from CASTALDO® is a transparent two-part 0% shrinkage RTV silicone molding rubber that cures very rapidly at normal room temperatures and cures even faster at slightly warmer temperatures.

That means that you can make a mold from your CAD CAM, RP and SLA models in the morning, shoot waxes 30 minutes later and cast them that afternoon. No more waiting.

No Heat - No Pressure - No Shrinkage - No Waiting!

New LiquaFast ICE makes strong, tough, tear-resistant permanent molds that last and last and do not become soft with age.

LiquaFast ICE works well with all RP types, including hard-to-mold Solidscape® designs. LiquaFast Ice’s low viscosity makes it easy to measure, mix and pour.

Normal cure time is only 60 - 90 minutes. Faster cure is possible at only 50°C / 120°F

LiquaFast ICE is economical, costing far less than traditional silicone RTV materials.

 $53.89

Quantityprice
1 to 5 $53.89
6 and above $48.51
Priced individually

Quantity (Each)Total Price
1
$53.89
Castaldo LiquaFast Ice
Castaldo LiquaFast Ice Castaldo LiquaFast Ice Castaldo LiquaFast Ice

Transparent RTV Silicone Jewelry Molding Rubber

New LiquaFast™ ICE from CASTALDO® is a transparent two-part 0% shrinkage RTV silicone molding rubber that cures very rapidly at normal room temperatures and cures even faster at slightly warmer temperatures.

That means that you can make a mold from your CAD CAM, RP and SLA models in the morning, shoot waxes 30 minutes later and cast them that afternoon. No more waiting.

No Heat - No Pressure - No Shrinkage - No Waiting!

New LiquaFast ICE makes strong, tough, tear-resistant permanent molds that last and last and do not become soft with age.

LiquaFast ICE works well with all RP types, including hard-to-mold Solidscape® designs. LiquaFast Ice’s low viscosity makes it easy to measure, mix and pour.

Normal cure time is only 60 - 90 minutes. Faster cure is possible at only 50°C / 120°F

LiquaFast ICE is economical, costing far less than traditional silicone RTV materials.

 

Castaldo LiquiFast Ice
(3-0525 / 73-0526)

Appearance Transparent, Blue
Shrinkage 0.0%
Working Time at 23°C (73°F) 15 Minutes
Setting Time at 23°C (73°F) 60 - 90 Minutes
Setting Time at 50°C (120°F) 30 Minutes
Hardness 40 - 43 Shore A
Cure System Platinum
Mixing Ratio 1:1 by Weight
Viscosity 8,500 CPS
Tensile Strength 3.5 +/- 0.5 N/mm2 508 +/- 73 PSI
Tear Strength 9 +/- 2.0 Nmm 108 +/- 11 PPI
Density Specific Gravity 1.12
Shelf Life 18 Months

Product Manual Product SDS

To Top