Heavy Duty 30 Amp 15V Rectifier - 110V
The Romanoff heavy-duty rectifiers are designed to give steady, direct current to your plating, stripping and electroplating applications.
This is our 30 Amp rectifier designed for the small to medium size shop. This unit will easily electroplate 25 average size rings and can strip 4-5 rings.
It is a good practice to filter your plating solutions monthly with filter paper (P/N Z49-735-13X) and activated charcoal (P/N Z49-700) to remove any impurities which may have been deposited into your working solution.
Always remember to electro-clean your jewelry first, then fresh water rinse, then steam clean and do not touch with your bare hands, only use rubber tipped steam tweezers for handling. For gold plating the anode is the stainless steel container as is or attach the red wire to the stainless steel anode (P/N 80-216) which is suspended in the solution in the polypropylene container).
Set your Romanoff rectifier to 3-4 volts for 45-60 seconds with moving back and forth. If the pieces come out very dark on a clean solution, then the pieces were "burned" from too much power.