Romanoff Original Blue Lo-Shrink Rubber Strips - 5lb Box
|1 to 5||$69.95|
|6 and above||$60.95|
Try this reliable mold rubber when your molds need to be just right!
Romanoff Blue Lo-Shrink Rubber is preferred by many craftsmen all over the world for its low shrinkage properties. Blue Lo-Shrink has been on the market with Romanoff since 1988, so it has been a proven product for all these years!
Romanoff Blue Lo-Shrink can be used by itself or in combination with any other brand of mold rubber, this will save you money and keep shrinkage to a minimum. If you are using Blue Lo-Shrink in combination with other rubbers, place the Blue Lo-Shrink around the model and the standard mold rubber around the outside of the mold. When your mold requires a rubber with very low shrinkage, use Blue Lo-Shrink, featuring less than 1% shrinkage.
It is a very forgiving product and is not temperature sensitive as with other low shrinkage products. Choose this durable rubber for its excellent tear strength, its ability to accurately capture fine detail and its excellent memory.
Hot quenching Romanoff Blue Lo-Shrink rubber molds in a cold water will produce shrinkage, always allow your standard or Romanoff Blue Lo Shrink molds to cool of at room temperature.
- 2-7/8" x 18" Strips
- Vulcanize Blue Lo-Shrink at a temperature of 310°F (155°C) for 15 minutes per 1/4" (6mm)
- For an even lower shrinkage rate, vulcanize at 290°F (143°C) for 24 minutes per 1/4" (6mm)
Sold in 5-lb Package.