Freeman Flake Waxes - Aqua - 5lbs
SKU
74-060
Link Copied to Clipboard
$30.95
- Brand: Freeman
- Material: Wax Flakes
- Color: Aqua
- Application: Most popular, easy fill, smooth surface
- Injection Temperature: 65ºC / 150ºF
- Country of Origin: United States
- Priced Per: 5lb package
Priced Per 5-lb Package
| Qty | Price Per Unit | ||
|---|---|---|---|
| 1-2 | $30.95 | ||
| 3-9 | $30.33 | ||
| 10 and Above | $29.71 |
Categories: Molding & Waxing, Waxes, Injection Wax
Featured Products
This all-purpose injection wax is our most popular formulation as it provides the ideal balance of characteristics demanded by most designers and casters. Also recommended for stone in place casting.
Injection Wax Trouble Shooting Guide
| Problem | Remedies |
| Wax Pattern Sticky-Pattern Distortion | - Reduce wax temperatures - Increase pattern dwell time |
| Pattern Flashing/Fins Mild Overfills | - Reduce wax temperature - Clean mold vents, increase size & quantity of vents - Reduce air pressure - Hold mold firmly/keep locks aligned - Allow mold to cool |
| Excessive Pattern Shrinkage | - Reduce wax temperature - Use low shrink/low sink wax - Use warmer mold - Increase pattern dwell time - Increase air pressure - Increase sprue size |
| Sink Area on Large or Heavy Patterns | - Reduce wax temperature - Use a low shrink/low sink wax - Increase pattern dwell time - Increase air pressure - Increase sprue size |
| Air Bubbles in Patten | - Reduce wax temperature - Increase wax temperature - Reduce air pressure - Make sure wax pot is full - Minimze trapped air in wax - Fit mold properly & securely onto injection nozzle |
| No Mold Fill or Partial Mold Fill | - Increase wax temperature - Use warmer mold - Clean mold vents, increase size & quantity of vents - Increase air pressure - Increase spure size - Reduce mold release spray/do not use talc - Use a more fluid was to fill thin sections - Make sure injection nozzle is not clogged - Do not hold mold too tightly |
| Ripple on Pattern Surfaces | - Increase wax temperature - Use warmer mold |
| Cracking/Brittle Wax Patterns | - Use a more flexible/ductile wax - Reduce pattern dwell time |
| Roughness on Pattern Surface | - Use a smoother, more polished master - Reduce mold release spray/do not use talc |
| Packing Qty | Priced Per 5-lb Package |
|---|
Related Products
Log In