New Aqua Ferris Bead Wax - 5lbs
SKU
74-0600A
Link Copied to Clipboard
$30.75
- Brand: Ferris
- Style: Bead
- Color: New Aqua
- Application: Medium hardness with good Memory
- Injection Temperature: 71ºC / 155ºF
- Country of Origin: United States
- Priced Per: 5lb package
Priced Per 5-lb Package
| Qty | Price Per Unit | ||
|---|---|---|---|
| 1-2 | $30.75 | ||
| 3-9 | $30.14 | ||
| 10 and Above | $29.52 |
Categories: Molding & Waxing, Waxes, Injection Wax
Featured Productss
- A very tough wax for lightweight or heavy patterns, aqua wax retains its flexibility and allows for good pattern readability with minimal shrinkage and high memory.
- Temperature: 155°F / 71°C
- Sold in 5-lb Packages
Injection Wax Trouble Shooting Guide
| Problem | Remedies |
| Wax Pattern Sticky-Pattern Distortion | - Reduce wax temperatures - Increase pattern dwell time |
| Pattern Flashing/Fins Mild Overfills | - Reduce wax temperature - Clean mold vents, increase size & quantity of vents - Reduce air pressure - Hold mold firmly/keep locks aligned - Allow mold to cool |
| Excessive Pattern Shrinkage | - Reduce wax temperature - Use low shrink/low sink wax - Use warmer mold - Increase pattern dwell time - Increase air pressure - Increase sprue size |
| Sink Area on Large or Heavy Patterns | - Reduce wax temperature - Use a low shrink/low sink wax - Increase pattern dwell time - Increase air pressure - Increase sprue size |
| Air Bubbles in Patten | - Reduce wax temperature - Increase wax temperature - Reduce air pressure - Make sure wax pot is full - Minimze trapped air in wax - Fit mold properly & securely onto injection nozzle |
| No Mold Fill or Partial Mold Fill | - Increase wax temperature - Use warmer mold - Clean mold vents, increase size & quantity of vents - Increase air pressure - Increase spure size - Reduce mold release spray/do not use talc - Use a more fluid was to fill thin sections - Make sure injection nozzle is not clogged - Do not hold mold too tightly |
| Ripple on Pattern Surfaces | - Increase wax temperature - Use warmer mold |
| Cracking/Brittle Wax Patterns | - Use a more flexible/ductile wax - Reduce pattern dwell time |
| Roughness on Pattern Surface | - Use a smoother, more polished master - Reduce mold release spray/do not use talc |
| Packing Qty | Priced Per 5-lb Package |
|---|
Related Products
Log In